In the beginning of the process
In the beginning of the process the floor will look smeared and dull. Make two to three passes with the high speed machine and the shine will return.
A secret to remember is to use a minimum amount of solution on the floor – more isn’t better. Wherever you see a black mark, spray that area lightly. The real trick to spray buffing is not letting the solution dry out; buffing must be done while your solution is still moist.
Do not leave the machine in one place for too long or the floor finish will burn. Remember, you are using a 1500-2500 rpm machine so if you keep it in one place you can leave a ring from the pad, and will have to scrub/recoat in order to repair the ring. Also watch for high spots on the floor because if you’re using an aggressive pad you can remove finish very quickly.
bni vancouver